 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
See Lots More In Store At Fred's Sound Of Music
|
|
|
|
|
|
|
www.fredsoundofmusic.com
|
|
 |
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3760 SE Hawthorne Blvd Portland, Oregon 97214 Phone: 503-234-5341
|
|
|
|
|
|
|
|
|
Rotel products are not available through mail order
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
Rotel RMB-1095 Power Amp @ 1000 Watts!
|
|
|
|
|
|
Producing a full kilowatt (1000 watts) of output power, the Rotel RMB1095 is a stunning realization of Rotel's capabilities in amplifier design. It is, for all intents and purposes, a multi-channel version of the RB-1090 stereo power amplifier, already recognized as one of the finest amplifiers available at any price. Rated at 200 watts per channel (all 5 channels driven into 8 ohms, 20 Hz-20kHz, less than 0.05% THD) the RMB1095 power supply is built around two Rotel made 1.2kVa toroidal transformers. Eight British-made BHC slit foil capacitors each with over 18,000 uf of energy storage combine with thirty 150 watt, 15 amp output devices for uncompressed reproduction of the most dynamic source material. A sophisticated "over current" protection circuit with front panel
|
|
 |
|
|
|
|
|
|
|
|
|
LED indicators guards against potentially harmful operating conditions. Special "current absorbers" minimize turn-on surges while gold plated balanced XLR and single-ended RCA inputs provide easy connection to a variety of controller/preamplifiers. Heavy rear casters assist in placing the amplifier.
|
|
|
|
|
|
|
|
|
Rotel's RDV-1080 Progressive Scan DVD Player
|
|
|
|
|
|
The Rotel RDV-1080, a direct descendent of our world-class CD players, brings the sonic advantages of Rotel's Balanced Design Concept to the exciting new DVD-A format. With the latest LSICs(large scale integrated circuits), the RDV1080 handles digital-to analog conversion of even 24 bit/192 kKz audio data. Jitter, a time-based inaccuracy found in less sophisticated designs, is virtually eliminated by advanced D/A converters, fully shielded reclocking circuitry and totally separate digital and analog power supplies.
|
|
 |
|
|
|
|
|
|
|
|
|
The RDV-1080 easily handles stereo PCM. Dolby Digital, dts, and MPEG audio. On the video front a RISC (reduced instruction set computer) IC capable of 100 million instructions per second (MIPS) controls a 10-bit/54 kKz video D/A converter to assure the best picture quality. The RDV-1080 delivers DVD's full video potential thanks to composite, S-,and component outputs. Progressive scan outputs deliver extraordinary resolution to suitable enabled monitors and projectors. In addition to full remote control, the RDV-1080 features a "display off" mode for reduced distraction in darkened rooms, gold-plated output jacks for optimum signal transfer and corrosion resistance, a high resolution graphical user interface (GUI) and a 13-step zoom function.
|
|
|
Rotel RSP-1068 A 7.1 Dolby Digital DTS Surround Sound Processor
|
|
|
|
|
|
Taking a page from Rotel's flagship, the Rotel RSP-1098, the RSP-1068 Surround Sound Processor/Preamplifier combines flexibility, superior performance, and easy operation. Flexibility begins with enough inputs and outputs to easily accommodate the most demanding system configurations. You can connect up to eight sources, five of them video-based, plus a CD player, external tuner, and an analog tape recorder. In addition, there are five assignable digital audio inputs,
|
|
|
|
|
 |
|
|
|
|
|
|
Rotel 7.1 Dolby Digital DTS Preamp
|
|
|
|
|
|
|
|
|
|
3 coaxial and 2 optical. There's also a direct analog stereo mode that bypasses all digital processing. To increase your viewing pleasure, the RSP1068 includes inputs and switching/transcoding for five composite, five S-video, and threecomponent video sources. Custom ID capability lets users program the front panel display so it precisely confirms all of your A/V input selections. Advanced microprocessors from Crystal Semiconductor handle Dolby Digital (complete with dynamic range adjustments), Dolby Digital EX, DTS, and Dolby Pro Logic II decoding. The RSP-1068 also automatically detects and decodes DTS ES, DTS ES Discrete and Matrix, DTS 24/96, HDCD, and MP3-encoded audio. There's also DTS Neo:6 mode for cinema sound and music. Six other DSP modes (Music 1-4, 5 CH Stereo, and 7 CH Stereo) complement traditional two-channel stereo operation to make the RSP-1068 more than suitable for any source. An adjustable subwoofer crossover and "on the fly" center, surround and subwoofer level adjustments mean you can adjust the RSP-1068's response to perfectly match your preferences. Do you want large front speakers for stereo, but small front speakers for Dolby encoded movies? The RSP1098 can do that and more. Upgradeable software means you won't be left behind by new advances either. The RSP-1068 integrates into advanced custom-designed systems with an RS-232 port, 12-volt "trigger" outputs, discrete on/off remote control command codes, multi-source/multi-zone operation with composite video, group delay settings, and so much more.
|
|
|
Rotel RCD-1072 HDCD Single Play Compact Disc Player
|
|
|
|
|
The Rotel RCD-1072 proves conclusively that cost-conscious high performance in a single disc CD player is still available - and still outperforming many so-called "audiophile" DVD players. Utilizing circuit configurations originally developed for Rotel's reference-class components, this affordable unit redefines your sonic expectations. The segmented power supply features a large toroid transformer for minimal power supply "sag" as well as reduced hum emissions. High quality rectifiers, tight tolerance voltage regulation, and low-ESR storage capacitors
|
|
|
 |
|
|
|
|
|
|
|
|
Rotel Top Of The Line CD Player
|
|
|
|
|
|
|
|
|
|
|
make sure that all circuits always operate as their designers intended. The critical analog stage uses meticulously selected parts in a "minimalist" circuit environment to insure the finest sound quality. The RCD1072 uses the same over-scan disc mechanism once reserved only for premium priced players. The remarkable new Burr-Brown PCM-1732 IC provides advanced digital filtration, HDCD decoding, and precise D/A conversion. A coaxial digital output supplements the high current analog outputs. A high-density FL display, complete programming capability, remote control, and a 12-volt trigger complete the picture.
|
|
|
|
|
|
Rotel RA-1070 Integrated Amplifier
|
|
|
|
|
 |
|
Flexibility and convenience highlight the Rotel RA-1070. Substanial power (100 watts x 2) and a damping factor of 400 assure precise control of all but the most demanding loudspeakers. The high capacity power supply features an oversized Rotel made toroidal transformer and British-made BHC slit foil capacitors. Convenience isn't an afterthought either. A separate Record Out selector adds flexibility. In addition, you'll find a 12 volt "trigger" output, A/B switching, separate Liten/Record selectors for eight (8) line level inputs along with a built-in MM phono, full remote control capability, an RS-232 data port, and discrete on/off remote control command codes. The RA1070 is truly a very impressive performance package combining musicality and easy operation.
|
|
|
|
|
|
|
|
|
|
|
Rotel RX-1052 FM/AM "Stereo" Receiver
|
|
|
|
|
|
The Rotel RX-1052 conclusively proves that "stereo" is very much a part of today's world where both music and movies provide enriching entertainment for the entire family. The RX1052 doesn't limit itself to one room either. In fact, the RX-1052's unique combination of capabilities means you can enjoy your music and video sources in many different areas of your home: the den, beside the pool, in the kitchen, or simply relaxing in the living room. Performance Counts, Consider the RX1052's basic capabilities for starters. Here, Balanced Design results in superior performance indeed. We rate power output very conservatively at 100 watts RMS per channel. But there are important differences between
|
|
|
|
|
 |
|
|
|
|
|
Rotel World Class "Stereo" Receiver
|
|
|
|
|
|
|
|
|
|
this rating and ones you may see from other manufacturers. That's because the RX-1052 features a rock-solid power supply built around an oversized custom-manufactured toroidal transformer coupled to high quality storage capacitors. Eight discrete, high current output transistors insure uncompromising reproduction of the most difficult sources, even when the Rotel RX-1052 is used with inefficient speakers in large rooms. Connecting those speakers is easy thanks to high quality, four-way binding posts. And switching between speaker pairs is even easier thanks to remote selection. For the vinyl aficionado - or just folks who continue to enjoy a substantial record collection - the RX-1052 features a high quality phono preamplifier optimized for moving magnet cartridges. Your New Stereo Centerpiece - With Video! For those who don't desire the multiple speaker boxes required for surround sound, the RX-1052 is the perfect complement to a new flat-panel TV and video sources like a DVD player or satellite box. Four composite video inputs, a monitor output, and video switching makes integrating your existing audio gear with the newest video components.
|
|
|
|
|
|
|
|
|
Fred's Sound Of Music, Inc. 3760 SE Hawthorne Blvd. Portland, OR. 97214 (503)234-5341 Open 7 days A Week Also Lake Oswego A/V Design Center Showroom (503)635-1362 Appointment Only
|
|
|
|
|
|
|
|